3Com PS Hub 40 User Manual page 72

5-10 C 5: M
HAPTER ANAGING THE
Terminal
PS H
UB
Terminal can usually be found from the Main window, in the
Accessories program group. To start a Terminal session (after connecting
to the hub's console port):
1 Double-click on the 'Terminal' icon to start the application.
2 If the Default Serial Port dialog box appears, select the serial port that
you are using to connect to the hub and click OK.
3 From the Settings menu in the main Terminal window, select Terminal
Emulation.
The Terminal Emulation dialog box appears.
4 Select 'DEC VT-100 (ANSI)' and click OK.
5 From the Settings menu, select Communications.
The Communications dialog box appears.
6 Configure the data bits to '8', stop bit to '1', parity to 'none', and click
OK.
7 Click in the main Terminal window and press [Return] several times to
start the communication.
DUA1640-5AAA02