Serial Web Utility; Introduction; Installing The Serial Web Utility - 3Com PS Hub 40 User Manual

C

Introduction

Installing the

Serial Web Utility

S W
ERIAL
If you are using a management station running Microsoft
Windows ® '95 and want to access the web interface through the PS
Hub's console port, you must use the 3Com serial web utility (SLIP
Driver) supplied on the CD-ROM that accompanies the hub.
Every time you want to access the web interface, use the serial web
utility to set up the connection to the web interface; it launches your
web browser and accesses the web interface using SLIP for you.
If you have any problems accessing the hub's web interface using the
serial web utility, refer to "Solving Problems With the Serial Web
Utility" on page C-4.
The serial web utility can be installed on to a management station that
already has other Transcend management applications installed on it.
The default directory into which the serial web utility is installed is
C:\Program Files\3Com\3Com Serial Web.
This can be changed during the installation if required.
The installation program is a standard Windows based installation.
To install the serial web utility:
1 Start Windows '95.
If you already have an existing Transcend
running, ensure that it is closed down.
2 Insert the CD-ROM into your CD-ROM drive.
3 Select Run from the Start menu.
U
EB TILITY
®
management application