Rack And Wall Mounting; Rack Mounting - 3Com PS Hub 40 User Manual

3-8 C 3: U
HAPTER SING THE
Rack and Wall
Mounting

Rack Mounting

PS H
UB
Two mounting brackets and four screws are supplied with the hub.
These are used for rack mounting and wall mounting the hub.
CAUTION: Disconnect all cables from the hub(s) before continuing.
Remove the self-adhesive rubber feet from the underside of the hub,
if already fitted.
The hub is 1U high and fits a standard 19in. rack.
To rack mount the hub:
1 Place the hub the right way up on a hard, flat surface with the front
facing towards you.
2 Locate a mounting bracket over the mounting holes on one side of the
hub, as shown in Figure 3-2.
Locating the Brackets for Rack Mounting
Figure 3-2
3 Insert the two screws and fully tighten with a suitable screwdriver.
4 Repeat the two previous steps for the other side of the hub.
5 Insert the hub into the 19in. rack and secure with suitable screws
(not provided).
DUA1640-5AAA02