Navigating The Menus And Entering Commands - 3Com PS Hub 40 User Manual

Navigating the
Menus and Entering
Commands
DUA1640-5AAA02
You can navigate the menus using any of the following methods:
Following the menu hierarchy — at the
prompt, type your selected menu name and press [Return].
The screen changes to show the next level of menus available or the
list of commands available within your selected menu.
Entering multiple menu names on the same line — if you are
familiar with the menu structure you can enter successive menus on
the same line at the
to display the system configuration, the CLI would read:
Select menu option: system display
Abbreviated commands — for speedy navigation of the menus, you
need only enter enough characters to uniquely identify the menu
you want at the prompt. For example, to display system
configuration, the CLI would read:
Select menu option: sy di
As you navigate through the menus, the prompt changes to display
your current position in the hierarchy. For example, if you are in the
interface sub-menu of the system menu, ready to enter your next
option, the prompt reads:
Select menu option (system) :
Entering Commands
When you reach the menu level containing the specific command you
want to enter, you are prompted for a command name. Commands
can also be entered at the end of the menu string. Where applicable,
default values for commands are shown in parentheses after the
prompt. If you press the [Return] key for a command with such a value,
the hub continues to use that value.
Returning to the Previous Menu
You can return to the previous menu, by entering
Returning to the Top-level Menu
You can return to the top-level menu by pressing the [Esc] key.
Obtaining Help
You can get help at any time by entering
Select menu option:
Select menu option:
?
Using the CLI Menus
prompt. For example,
at the prompt.
q
at the prompt.
6-5