3Com PS Hub 40 User Manual page 162

D-2 A D: A
PPENDIX GENT
U U
PGRADE TILITY
4 Enter the upgrade command:
PS Hub 40 software upgrade —
PS Hub 50 software upgrade —
Where xx_yy is the version of agent software. The version of agent
software on the CD-ROM is the current version that was in the hub
originally. View the contents of the CD-ROM to see the filename for
this version of agent software.
You can also use the following parameter with the upgrade command
to specify the serial (COM) port to use for the PC. The default for this
is COM 1:
or
-c 1 -c 2
An example of the upgrade command with this parameter is:
update -c 1 psh
5 Power off the hub.
6 Press [Return].
7 Power on the hub immediately (within 5 seconds).
The utility transfers the agent software to the hub.
8 Repeat all of the steps for any other hubs that need upgrading.
update psh
update psf
xx yy
_ .bin
xx yy
_ .bin
xx yy
_ .bin
DUA1640-5AAA02