Danfoss VLT HVAC Drive FC 100 Series Design Manual page 89

®
VLT HVAC Drive Design Guide
5.2.11. Mains connection for B4, C1 and C2
Illustration 5.18: How to connect to mains and earthing for B4.
5.2.12. Mains connection for C3 and C4
Illustration 5.20: How to connect C3 to mains and earthing.
5.2.13. Motor Connection
NB!
Motor cable must be screened/armoured. If an unscreened / unarmoured cable is used, some EMC requirements are not complied
with. For more information, see
Illustration 5.19: How to connect to mains and earthing for C1 and C2.
Illustration 5.21: How to connect C4 to mains and earthing.
EMC specifications .
MG.11.B7.02 - VLT ® is a registered Danfoss trademark
5. How to Install
5
89