Danfoss VLT HVAC Drive FC 100 Series Design Manual page 101

®
VLT HVAC Drive Design Guide
Illustration 5.34: Assembling of IP21 / IP55 / NEMA TYPE 12 housing with mains disconnector.
5.2.24. Basic Wiring Example
1. Mount terminals from the accessory bag to the front of the fre-
quency converter.
2. Connect terminals 18 and 27 to +24 V (terminal 12/13)
Default settings:
18 = latched start
27 = stop inverse
Illustration 5.35: Terminal 37 available with Safe Stop Function only!
MG.11.B7.02 - VLT ® is a registered Danfoss trademark
5. How to Install
5
101