Danfoss VLT HVAC Drive FC 100 Series Design Manual page 59

®
VLT HVAC Drive Design Guide
3.1.11. Remote mounting Kit for LCP
The Local Control Panel can be moved to the front of a cabinet by using
the remote build in kit. The enclosure is the IP65. The fastening screws
must be tightened with a torque of max. 1 Nm.
Ordering no. 130B1113
Illustration 3.5: LCP Kit with graphical LCP, fasteners, 3 m cable and
gasket.
LCP Kit without LCP is also available. Ordering number: 130B1117
Technical data
Enclosure:
Max. cable length between and unit:
Communication std:
Ordering no. 130B1114
Illustration 3.6: LCP Kit with numerical LCP, fasternes and gasket.
MG.11.B7.02 - VLT ® is a registered Danfoss trademark
3. VLT HVAC Drive Selection
IP 65 front
3 m
RS 485
3
59