Cleaning And Maintenance; Servicing And Technical Support; Declaration Of Conformity; Technical And Operational Specification Of The Device - Braster In-home Breast Examination System User Manual

12. CLEANING AND MAINTENANCE

Wipe thoroughly both surfaces of all of the three matrices with the cloth provided. It is important that the surface of the matrix
is clean, i.e. free of any visible contamination (e.g. fingerprints, dust). The inner side of the matrix is technologically matted. The
foil surface on the inner side of the matrix bears directional scratches, which have been made deliberately in a technological
procedure performed in order to achieve appropriate light diffusion in the working space of the image acquisition device.
The image acquisition device and the matrices must be kept in the original packaging, at temperatures between −5°C and
+60°C. Do not expose the device to UV radiation (e.g. from UV lamps used for air disinfection or from the sun).

13. SERVICING AND TECHNICAL SUPPORT

If you require technical support or if you want to report a malfunction of the device or any other unexpected circumstances,
contact your local distributor of the Braster System or the manufacturer. Contact details are available on www.braster.eu.
USER RESPONSIBILITIES
The Braster device must be used in accordance with the recommendations given in this User Manual and labels. Do not use
the device if it has been damaged. Any parts that are missing, incomplete, damaged or worn out must be immediately replaced
at an authorized service point (details are available on www.braster.eu). Any actions connected with repairs or replacements
may only be performed by personnel of an authorized service point. The manufacturer is not liable for any damages caused by
non-compliance with the user manual.
Warranty
The Braster device is covered by the manufacturer's warranty for 24 months. The warranty shall only be valid if accessories
and spare parts approved by BRASTER S.A. are used and the device is used as described in the user manual and according to
the intended use.
Any repairs of the Braster device must be made by personnel of an authorized service point. Any repairs performed by
unauthorized persons will result in voiding of the warranty.
26

14. DECLARATION OF CONFORMITY

BRASTER S.A. hereby declares that the Braster System conforms with the essential requirements and other relevant provisions
of the Directive 93/42/EEC and the Directive 2011/65/EU. If you would like to receive the declaration of conformity, contact the
manufacturer (contact details are given on the last page of this User Manual).
ELECTROMAGNETIC COMPATIBILITY
The Braster device is intended for use in an electromagnetic environment with controlled RF interference. The customer or
the user of the image acquisition device may help prevent electromagnetic interference by maintaining the minimum required
distance between the mobile device and cellular radio devices (transmitters). This equipment is not subject to the protection
from harmful interference and may not cause interference with duly authorized systems.

15. TECHNICAL AND OPERATIONAL SPECIFICATION OF THE DEVICE

Weight of the image
acquisition device (excluding 305 g
matrix)
Weight of one matrix 87 g
Device size (excluding diameter 17.2 cm
matrix) height 13 cm
−25°C to +5°C (-13°F to +41°F), and
Limits of storage conditions +5°C to +35°C (+41°F to +95°F) in ambient humidity of up to 90%, without condensation, and
+35°C to +70°C (+95°F to +158°F) with vapor pressure of up to 50 hPa
Recommended storage −5°C to +60°C (+23°F to +140°F)
conditions humidity between 10% and 90% (without condensation)
27