Questions; Turning The Device On/Off; Device Connection; Connecting To An Ios Device - Braster In-home Breast Examination System User Manual

Braster system
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8
• Start the Braster Care mobile app on your smartphone or tablet.
• Log into the app by entering your login and password (which are the same as for your individual account on myaccount.
braster.eu).
• Click START to begin the examination. You do not need to undress at this stage yet.
During the examination the mobile device will display a navigation screen with all of the stages. The stage you are currently
going through will be highlighted in the app. Click the name of the stage to begin. The navigation screen will be displayed after
each stage. Note that you must go through all of the stages of the examination one by one. The app will not let you skip any
stage. Once you have finished a step, you will not be able to return to it.

7.2.2. QUESTIONS

In this part of the examination you will answer questions which will check whether you are eligible to perform the examination
on that particular day. These questions will also be useful for interpretation of the results. Some of them will be YES or NO
questions. If your answer enables you to perform the examination, you will be redirected to the next screen. However, if you
are unable to perform the examination, an explanatory note will be displayed. You can always return to the previous question
by clicking BACK.
In some of the questions you will select your answer from a number of options. Always remember to answer truthfully, as your
answers affect the reliability of the results.

7.2.3. TURNING THE DEVICE ON/OFF

Turn the device on by pressing the ON/OFF button for two seconds. When the device is on, the battery icon will flash green.
When the device is connected to your mobile device, the battery icon will be steady green.
In normal conditions the device turns itself off automatically once the examination is completed. To switch the device off in the
emergency mode, press the ON/OFF button and hold it for five seconds.
The device turns off automatically after ten minutes of inactivity. Therefore, if you find it necessary to interrupt the examination
for more than ten minutes, you will be required to turn the Braster device on and connect it to the mobile device once again to
continue.
18

7.2.4. DEVICE CONNECTION

Establishing a connection between the Braster device and a mobile device differs slightly for Android and iOS.
To connect the Braster device follow the instructions displayed on subsequent screens on your mobile device.
Position the device to see the label with the name of the Braster WiFi signal and password. The label is inside the device and is
visible only when the matrix has been removed (Fig. 4A & 4B ).

7.2.4.1. CONNECTING TO AN iOS DEVICE

Click "Settings" on the connection screen. Go to the WiFi settings. From the list of WiFi signals select the Braster signal
specified on the label and enter the password. Return to the app. A message will display information whether a connection has
been established successfully.
Do not worry if you went back to the main screen of your mobile device and not to the app directly, you may go back to the
application again. At this point you should already be connected to the device.
If, for some reason, you are unable to go to the WiFi settings on the connection screen in the app, leave the app, go to "Settings"
in your mobile device, select the "WiFi" tab and select the signal of your Braster device and enter the password. Afterwards,
you may return to the app.

7.2.4.2. CONNECTING TO AN ANDROID DEVICE

Select the signal of your Braster device on the connection screen and enter the password (the signal's name and password
are given on the device label located inside the device). A message will display information whether a connection has been
established successfully.
The app will remember your login and password, so there will be no need for you to re-enter them when performing an
examination in the future.
YOUR MOBILE DEVICE WILL NOT HAVE ACCESS TO THE INTERNET WHEN IT IS CONNECTED TO THE BRASTER DEVICE
19

Advertisement

Table of Contents
loading

Table of Contents