Clarke CBTSR Operation & Maintenance Instructions Manual page 6

15. Pull the plug out of the outlet.
• Never remove loose splinters, chips or jammed wood pieces from the
running cutter bit.
• When the cutter bit is blocked due to abnormal feed force during
cutting, turn the machine off. Remove the work piece and ensure that
the cutter bit runs freely. Turn the machine on and start a new cutting
operation with less feed force.
16. Do not leave tools inserted in the machine.
• Before switching on, make sure that adjusting tools are removed.
17. Avoid inadvertent starting.
• Make sure that the switch is switched off when plugging the plug into an
outlet.
18. Stay Alert.
• Pay attention to what you are doing. Remain sensible when working. Do
not use the electric tool when you are distracted or tired.
19. Check the electric tool for potential damage.
• Protective devices and other parts must be carefully inspected to
ensure that they are faultfree and function as intended prior to
continued use of the electric tool.
• Check whether the moving parts function faultlessly and do not jam or
whether parts are damaged. All parts must be correctly mounted and
all conditions must be fulfilled to ensure faultfree operation of the
electric tool.
• The moving protective hood may not be fixed in the open position.
• Damaged protective devices and parts must be properly repaired or
replaced.
• Do not use any faulty or damaged connection cables.
• Do not use any electric tool on which the switch cannot be switched on
and off.
20. ATTENTION!
• The use of other tools or accessories than recommended items can
have a risk of injury.
21. Have your electric tool repaired by a qualified electrician.
• This electric tool conforms to the applicable safety regulations. Repairs
may only be performed by an electrician using original spare parts.
Otherwise accidents can occur.
The operator must always stand in front of the machine to avoid danger.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
6