Environmental Protection - Clarke CBTSR Operation & Maintenance Instructions Manual

INTRODUCTION
Thank you for selecting this Clarke Bench Top Shaper.
The machine is ideal for shaping wood and plastic and also for cutting out
knots, cutting grooves, removing recesses, copying curves and logos, etc. The
machine must not be used on metal, stone, etc.
GUARANTEE
The machine is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Your receipt is required as proof of
purchase.
This guarantee is invalid if the machine is found to have been abused,
tampered with, or not used for the purpose for which it was intended.
Faulty goods must be returned to their place of purchase, it must not be
returned to us without prior permission.
This guarantee does not effect your statutory rights.

ENVIRONMENTAL PROTECTION

Through purchase of this tool, the customer is taking on the obligation
to deal with the WEEE in accordance with the WEEE regulations in
relation to the treatment, recycling & recovery and environmentally
sound disposal of the WEEE.
In effect, this means that this tool must not be discarded with general waste.
Refer to the laws governing Waste Electrical and Electronic Equipment (WEEE) at
a recognised disposal facility.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
2