White Or Gloss Ink - Roland VersaUV LEF-20 Master Manual

When Dot Drop-Out Cannot Be Cleared Up for White or Gloss Ink
In this operation, all white and gloss inks within the printer are discharged and the interior is cleaned . The
inks are refilled after cleaning . This operation requires two SOL INK cleaning cartridges .
" If you want to perform maintenance on ink other than white or gloss ink, see "Cleaning All Print Heads"
(P . 44) .
MEMO
White ink tends to settle and may harden if left alone for a lengthy time . Therefore, abnormal ink emission
including dot drop-out tends to occur more frequently than with other inks, even when using the cleaning
function (normal, medium, or powerful) or manual cleaning .
NOTE
Be sure to hold the handle of the front cover and open and close it gently .
Important notes on this procedure
• A large amount of ink will be discharged during this operation . Perform this operation only when ink emission
failures (such as dot drop-out) cannot be improved even after performing "normal," "medium,"powerful,"
and "manual" cleaning .
" "Maintenance That Should Be Performed Daily" (P . 28)
" "Medium and Powerful Cleaning" (P . 32)
" "Manual Cleaning" (P . 35)
• Be sure to use SOL INK cleaning cartridges . Using any other cleaning cartridges may result in breakdown .
• Follow the procedure and fill the machine with ink as soon as possible . Leaving the machine alone without
ink may damage the print heads .
Procedure
Prepare
SOL INK cleaning cartridges (2)
1.
Press [MENU] .
2.
Press [ ] to display the screen shown below .
MENU
INK RENEWAL
3.
Press [ENTER] .
CLEANING LIQUID
IS REQUIRED
4.
Press [ENTER] .
EMPTY
DRAIN BOTTLE
5.
Discard the discharged fluid, and then reattach the drain bottle (P .30) .
6.
Press [ENTER] .
42
Chapter 2 Maintenance