Step 2：Make The Network Settings On The Machine - Roland Texart RT-640 Setup Manual

6. Network Settings
Step 2：Make the Network Settings on the Machine
1.
Set the IP address.

Press







Repeat and

2.
Set the subnet mask.


34
.
Press
left appears.
Press
Press
[IP ADDRESS]: 192.168.000.XXX
Note: Here, "XXX" can be any number between 2 and 254.
However, be sure to eliminate the number overlapping with the
setting you made in Step 1. Here, "192.168.000.003" shall be entered
as an example.
For the part corresponding to "192.168.000," apply the same value
as the setting of your computer.
Press
Press

to set all the address numbers.
When you finish making the setting, press
Press
The screen shown in the figure appears again.
Press
Press
several times until the screen shown on the
in this order.
three times.
to select the address number.
.
.
.
twice.
.