Load A Preset And Print; Make Fine Adjustments Of Preset Settings And Print - Roland VersaUV LEF-20 Master Manual

Load a Preset and Print

Load the settings saved in a preset and
perform printing .
NOTE
Be sure to hold the handle of the front cover
and open and close it gently .
Procedure
1.
Press [MENU] .
MENU
PRESET
2.
Press [ ] twice .
LOAD
DEFAULT
3.
Press [ ] or [ ] to select the name of the
preset (settings) you want to load .
Select one of the 40 types of presets (when
no names have been assigned, select from
NAME1 to NAME40) or DEFAULT (DEFAULT is
the factory defaults for each setting) .
4.
Press [ENTER] .
SETUP MEDIA
Media setup is canceled ([SETUP] turns off ) .
5.
Open the front cover, and then secure the
media in place .
" "1 . Loading Media (Media Setup)" (First
Step Guide)
6.
Press [SETUP] .
The loaded preset settings are displayed .
HEIGHT:000.0mm
7.
Press [ENTER] .
W:508mm L:330mm
H:100.0mm
Saving Frequently Used Media Sizes (Preset Function)
MEMO
Every time you set up the media, you can
set the print area (base position and range) .
For details, refer to "Setting the Print Area for
Each Setup of Media" (P . 11) .
8.
Start printing .
Printing is performed with the loaded preset
settings .
Make Fine Adjustments of
Preset Settings and Print
You can change part of a preset and then
perform printing .
For instance, you can change the print area
only without changing the media height
setting .
Procedure
1.
"Load a Preset and Print" (P . 7)Load a
preset and fix the position of the media by
following steps 1 to 7 of .
2.
If you want to change the height setting of
the media, set the height of the media .
" Steps 2 to 5 of "2 . Setting the Height of the
Media Automatically" (First Step Guide)
" Steps 4 and 5 of "Setting the Height of the
Media Manually" (P . 8)
3.
If you want to change the print area, set the
print area .
" "Changing the Print Area" (P . 12)
4.
Start printing .
Chapter 1 Fully Utilizing the Machine
7