Replacing The Filter - Roland VersaUV LEF-20 Master Manual

Replacing Consumable Parts

Replacing the Filter

This section explains how to replace the
filter used for the mist fan that adjusts the
scattering of ink mist . When the screen
displays a message like the one shown below,
it is time to replace the item . Replace them
with new items .
For information about purchasing a filter,
contact your authorized Roland DG Corp .
dealer .
When a warning beep sounds
during filter replacement
A warning beep sounds 10 minutes after
operation begins . Stop work and close
the front cover . Press [ENTER] to exit the
filter replacement menu . After that, restart
operation from the first procedure .
CAUTION
48
Chapter 2 Maintenance
Be sure to perform operations
as specified by the instructions
above, and never touch any area
not specified in the instructions .
Failure to observe this instruction
may cause the machine to move
suddenly, resulting in injury .
1 . Enter the REPLACE FILTER Mode
1.
When the message shown in the figure
appears, press [ENTER] .
TIME FOR
FILTER REPLACE
2.
Remove any media .
3.
Press [MENU] .
4.
Press [ ] to display the screen shown below .
MENU
SUB MENU
5.
Press [ ], then [ ] .
SUB MENU
MAINTENANCE
6.
Press [ ], [ ], then [ ] .
MAINTENANCE
REPLACE FILTER