Monitoring And Configuring The Machine; Using The Status Monitor - Roland VersaStudio BT-12 Operating Instructions Manual

6. Monitoring and Configuring the
Machine
This chapter describes how to monitor and configure the machine.
Using the Status Monitor
Using the Status Monitor, you can check the print job status, error messages, amount of
remaining ink and other machine status information.
You can specify how to receive notification of print job status via the Status Monitor.
1.
Open the [Printing Preferences] dialog box.
2.
Click the [Maintenance] tab.
3.
Click [Status Monitor Settings].
4.
From the list in the [Status Monitor display settings] area, select a method for
launching the Status Monitor.
5.
Press [OK] two times.
For details about [Status Monitor Settings], see the printer driver Help.
•
You can cancel printing from the Status Monitor. See page 86 "Canceling Printing from the
•
Status Monitor".
To check the amount of remaining ink, see page 160 "Replacing an Ink Cartridge".
•
To check the amount of waste ink, see page 166 "Replacing an Ink Collector Unit".
•
To check the error messages on the Status Monitor, see page 208 "Status Monitor Errors".
•
131