Continuously Outputting Print Data - Roland VersaUV LEF-20 Master Manual

Continuously Outputting Print
Data
When multiple print data entries are sent at a
time from the computer, the print data entries
can be output in a row .
Procedure
1.
Press [MENU] .
2.
Press [ ] to display the screen shown below .
MENU
SUB MENU
3.
Press [ ] .
4.
Press [ ] several times to display the screen
shown below .
SUB MENU
PRT CONTINUE
5.
Press [ ] .
PRT CONTINUE
ENABLE DISABLE
6.
Press [ ] or [ ] to select "ENABLE . "
PRT CONTINUE Explanation
Select this setting when you want
to output multiple data entries in
a row without replacing the media .
ENABLE
This function is useful when you
want to overlay multiple images on
a single piece of media .
Even when multiple data entries are
sent at a time from the computer,
they are not output in a row and the
screen shown below appears when
DISABLE
one data entry is output .
( d e f a u l t
FINISHED PRINT
setting)
If you want to replace the media
for each print data entry, select
"DISABLE . "
Fully Utilizing Convenient Functions
7.
Press [ENTER] .
8.
Press [MENU], then [ ] to go back to the
original screen .
Description
When "DISABLE" is selected and this screen
is displayed, no data is accepted from the
computer .
FINISHED PRINT
Press [ENTER] to return to the screen shown
below, at which point it will be possible to
once more accept data from the computer .
W:508mm L:330mm
H:100.0mm
Chapter 1 Fully Utilizing the Machine
21