IntelligentAg Engage Zone Control Operator's Manual page 21

Viewing Diagnostics
Reposition All Gates
Disable Gate
Enable & Reposition
600890-000059, rev 1.1
Recalibrates all gates on all bins
(used when troubleshooting an
error).
IMPORTANT: Start the fan before
repositioning gates to make sure
that there isn't debris in the gate
area.
Locks a gate and stops it from
receiving commands.
Once a gate is disabled, the gate
will not open or close, even if a
command affects all gates.
IMPORTANT: Ensure that the gate
is open before disabling the gate.
Re-enables a disabled gate.
View diagnostics for the next gate.
View diagnostics for the previous
gate.
Engage Zone Control Operator's Guide
Recalibrates all gates on all
bins.
Locks Gate 1 on Bin 1.
Re-enables Gate 1 on Bin 1.
View diagnostics for Gate 2
on Bin 1.
View diagnostics for Gate 8
on Bin 3.
Page 21 of 25