Configuring Serial Numbers; Figure 15: Intelligent Ag Serial Number Configuration Settings Screen - IntelligentAg Engage Zone Control Operator's Manual

Configuring Engage Zone Control Application

4.3. Configuring Serial Numbers

Enter the serial numbers for each set of gates.

Figure 15: Intelligent Ag Serial Number Configuration settings screen

1. Navigate to the Intelligent Ag section control settings screen, if you are not already there.
2. Input the serial number for gates 1-4 and 5-8.
a. Remove the cover from the Engage Zone Control unit and find the serial numbers on
the two motor controllers.
Gates 1-4 correspond with the serial number on the leftmost motor controller, and
gates 5-8 correspond with the rightmost motor controller.
b. Input the serial number for gates 1-4 and 5-8 of each bin.
Bin 1 is the bin closest to the tractor. Bins 2 and 3 (if applicable) are further away
from the tractor.
3. Tap Save.
4. Reposition all gates
a. Tap Diagnostics.
b. Tap Reposition All Gates.
600890-000059, rev 1.1
Engage Zone Control Operator's Guide
Page 15 of 25