Viewing Covered And Saved Area; Updating Motor Controllers; Figure 19: Motor Controller Update Screen - IntelligentAg Engage Zone Control Operator's Manual

Using the System

5.4. Viewing Covered and Saved Area

View the covered and saved area counters to see the total area seeded and the area saved by
using Engage Zone Control.
1. Tap in the lower right corner.
2. Tap Intelligent Ag.
3. Tap Gates.
4. View your counters.
Covered area: Total area that you've gone over with the whole tool.
•
Saved area: The amount of acres you would have over seeded without Zone
•
Control. This is calculated using tractor speed, work switch state, and section state
(open or closed).
You can calculate your savings by taking the saved area number and multiplying it
by your input costs.

5.5. Updating Motor Controllers

The Updating Motor Controllers screen appears when the motor controllers are updating. You
don't need to do anything during this process.
The motor controller LEDs will flash during the update, which may take up to 10 minutes. The
update status is indicated by the colors below:
Serial number text color
Green
White
Red
600890-000059, rev 1.1

Figure 19: Motor controller update screen

Update complete
Update in progress
Update failed.
Restart the system (turn off and turn on the tractor). If it fails
again, contact your dealer.
Engage Zone Control Operator's Guide
Status
Page 19 of 25