Configuring Engage Zone Control Application; Navigating To Intelligent Ag Section Settings; Figure 9: Intelligent Ag Configuration Summary Screen - IntelligentAg Engage Zone Control Operator's Manual
Hide thumbs
Also See for Engage Zone Control:
- Maintenance manual (9 pages) ,
- Manual (5 pages) ,
- Information notice (8 pages)
Table of Contents
Advertisement
Configuring Engage Zone Control Application
4. Configuring Engage Zone Control Application
Configure the Engage Zone Control application settings so that the gate status and mapping
display correctly.
4.1. Navigating to Intelligent Ag Section Settings
1. Tap
in the lower right corner.
2. Tap Intelligent Ag.
3. Tap Config.
Only the Gates and Config buttons are used with the Engage Zone Control application.
The other buttons will not change zone control settings.
4. Tap Section Control Configure.
Only the Section Control Configure and Diagnostics buttons are used with the
Engage Zone Control application. The other buttons will not change zone control
settings.
Figure 9: Intelligent Ag Configuration Summary screen
600890-000059, rev 1.1
Engage Zone Control Operator's Guide
Page 12 of 25
Advertisement
Table of Contents
Need help?
Do you have a question about the Engage Zone Control and is the answer not in the manual?