Security Switch; Leds - Honeywell enCore FC Series Operating Instructions Manual

Flow computer
Table of Contents

Advertisement

Design and Function
You can activate the controls located at the top of the touch screen by using
the [Up], [Down], [Left] and [Right] keys, and activate them by pressing
[Enter].Use the [Up] and [Down] keys to scroll through the contents of a
display. ( chapter
5.3.4

Security Switch

The security switch is a sealable rotary switch. The security switch is closed
by turning it clockwise until it stops.
The security switch is part of the enCore concept for limiting user rights. A closed
security switch can prevent certain actions of the user (e.g. changing certain
parameters or software downloads of legally relevant (fiscal) or operative (non-
fiscal) firmware module).
5.3.5

LEDs

Two multi-colored LEDs are placed on the operation panel: The power LED
and the status LED.
Power-LED
LED Status
off
red
green
orange
Page 36 of 120
5.3.1 Device
Keys, S. 32)
Explanation
power supply off; no USB connection
power supply off; USB connection detected
power supply on; no USB connection
power supply on; USB connection active
Table 3: Power-LED
Operating Instructions
5
enCore FC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Encore fc1Encore mc1Encore series

Table of Contents