Table of Contents
Advertisement
5
You switch back to the calling display, i. e. the display that was
previously opened.
The basic display can always be reached with a maximum of two steps –
either by pressing
is displayed directly.
If the buttons are marked with the checkmark
action has been performed previously (e. g. setting the system time) and the
device is waiting for a confirmation by the user. User actions can be
accepted with
or discarded with
Navigation options in the „home" display
You open a folder by touching its symbol in the display; the AFBs grouped in
that folder are shown subsequently.
After having touched the symbol of an AFB or any other selected func-
tionality, the corresponding main display is shown.
Navigation options in other displays
Most device displays show measurement results, status information or
settings.
When operating an enCore FC device, hyperlinks and actions are distin-
guished: Use hyperlinks to navigate through the device's displays and use
actions to perform a specific functionality. Both hyperlinks and actions are
presented in the display with a blue font color and underlined.
If a display contains more lines than can be presented at once, an orange
scroll bar appears at the right edge of the screen.
You can scroll the contents of the display up or down by moving your finger
vertically across the display area (vertical "wiping").
Navigation via keys
The buttons at the lower edge of the touch screen can alternatively be
activated by pressing the associated (hardware) keys located directly
underneath.
enCore FC
and
successively, or by pressing
.
Operating Instructions
Design and Function
, if this button
or the X symbol
, a user
Page 35 of 120
Advertisement
Table of Contents
