Table of Contents
Advertisement
2 About these Instructions
The present documentation are the Operating Instructions of the overall
documentation, and describe the assembly, installation, commissioning and
maintenance of the flow computer enCore FC series (called enCore FC
below).
These instructions make it possible to work with the enCore FC in a safe and
efficient manner.
Compliance with all the safety and handling instructions specified in these
Operating Instructions is a prerequisite to working with the enCore FC in a
safe manner and using it properly, and for obtaining accurate measurement
and calculation results.
In addition, compliance is also necessary with the guidelines, standards,
local accident prevention regulations and general safety regulations that
apply for the enCore FC's area of application.
The illustrations in this manual serve to depict the facts that are being
explained, and therefore may differ from the actual design of the enCore FC
depending on the configuration of the device and enSuite.
The data and material properties that are presented below are
guidelines. They must be reviewed for each individual case and
corrected if required.
2.1 Target Group Definition
The present documentation is directed to qualified electricians in the fields of
switch cabinet construction and maintenance, as well as qualified personnel
with specialized knowledge in device assembly and commissioning.
The qualifications for different areas of activity are listed below:
•
trained individual
A person, who has been instructed by the plant operator in an
enCore FC
Operating Instructions
Page 11 of 120
Advertisement
Table of Contents
