Table of Contents
Advertisement
10
10.5.1 Data protocols and its TCP default port (Ethernet)
Protocol
HTTP
MMS
Modbus TCP
NTP
DSfG
Tabelle 10-1: Default ports used by enCore devices
enCore FC
Default
Description
port
80
HyperText Transfer Protocol allows e.g. to
access the enCore device via the remote
operation panel.
102
Manufacturing Messaging Specification
(acc. to ISO standard 9506) allows
communication between enSuite and
enCore devices.
502
Protocol for the data exchange of user-
defined registers between a central control
station and enCore devices over a standard
TCP/IP network.
123
Network Time Protocol for the highly
accurate time synchronization of enCore
devices with an NTP time server.
8000
Digitale Schnittstelle für Gasmessgeräte
(digital interface for gas measuring devices)
allows communication in a heterogeneous
network of different DSfG-compatible
devices. DSfG is a digital data protocol that
is well-established in Germany.
Operating Instructions
Technical Data
Page 113 of 120
Advertisement
Table of Contents
