Honeywell enCore FC Series Operating Instructions Manual page 5

6.4.12 HART Measurement Transmitter (EEx i) via MFE7 Board
(barrier in source mode)
6.4.13 HART Measurement Transmitter (EEx d) via MFE7 Board
(redundant, without barrier) - Burst Mode
6.4.14 HART Measurement Transmitter (EEx i) via MFE7 Board
(redundant, barrier in source mode) - Burst Mode
6.4.15 HART Measurement Transmitter (EEx d) via MFE7 Board
(Multi-Master, without barrier) - Multidrop Mode (from Basic
System 03-25)
6.4.16 HART Measurement Transmitter (EEx i) via MFE7 Board
(Multi-Master, barrier in source mode) - Multidrop Mode (from
Basic System 03-25)
6.4.17 Gas Meter (Turbine): Encoder Index, 2 LF/HF Sensors (EEx i)
via ExMFE5 Boards
6.4.18 Gas Meter (Turbine): Encoder Index, 2 LF/HF Sensors (EEx i)
via MFE7 Board
6.4.19 Gas Meter (Turbine) SMRI Bi-directional: 2 HF Sensors, Flow
Direction Detection (EEx i) via MFE7 Board
6.4.20 Gas Meter (Turbine) SMRI Bi-directional:
Flow Direction Detection Internal (EEx i) via MFE7 Board
6.4.21 Q.Sonic Ultrasound Gas Meter: Serial RS485 (EEx d) via
MFE7 Board
6.4.22 Q.Sonic6 Ultrasound Gas Meter: Serial RS485 (EEx d) via
MFE7 Board
6.4.23 FLOWSIC600 Ultrasound Gas Meter: Serial RS485 (EEx d)
via MFE7 Board
6.4.24 Serial Interface through COM Port (CPU or MSER4-Board)
6.4.25 Analog Output over MFA8 Board (0/4 ... 20 mA)
6.4.26 Message Output over MFA8 Board
6.4.27 Pulse Output over MFA8 Board
7 Device Configuration and Commissioning
7.1 Device Configuration
7.2 Commissioning the Measurement System
7.2.1 Checking Device Settings
7.2.2 Checking Measurement Input Values
enCore FC Operating Instructions
Contents
71
73
75
77
79
81
82
84
85
87
88
89
90
92
93
95
96
97
98
99
99
Page 5 of 120