Table of Contents
Advertisement
Technical Data
10.2 Input channels
ExMFE5 input
board
22
Burst mode is not supported by all transmitters.
Page 110 of 120
•
4 navigation and 2 function keys
•
2 multicolor LEDs for power and status
indication
•
sealable security switch
Table 7: General technical data
•
3 NAMUR inputs [Ex ib Gb] IIC for LF pulses
(max. 2 Hz, min. pulse length 200 ms) or HF
pulses (max. 5 kHz) or messages. One of
these inputs can alternatively be used for
connecting an encoder index.
•
analog input for a transmitter with 4 ... 20 mA
interface [Ex ib Gb] IIC, alternatively suitable
for connecting transmitters with HART interface
(1 transmitter in burst mode
mitters in multidrop mode)
•
input for Pt100 temperature transmitter in
4-wire technology, [Ex ib Gb] IIC
•
all inputs galvanically isolated amongst each
other, and inputs and system
Operating Instructions
10
22
or up to 4 trans-
enCore FC
Advertisement
Table of Contents
