Assembly Instructions
If necessary, install or update to the next enSuite on the work computer
►
( enSuite installation guide
Read out the enCore FC device's parameterization with enSuite.
►
Disconnect the power supply.
►
Remove all the external cable connections from the device.
►
Remove the 4 mounting screws present on the rear of the device
►
(Positions A).
A
8
The installation guide is located on the enSuite installation CD. Alternatively, you can
download the PDF from the Elster website in the software downloads section:
www.elster-instromet.com/en/software-downloads.
Page 50 of 120
8
).
Fig. 6-2: Rear side of the device (example),
mounting screws are removed
Operating Instructions
A
enCore FC
6