Hardi HC 9600 Operator's Manual page 79

Season tab
A season is defined as the calendar year that the crop will be harvested. A season has a start and an end date. Creating a
season and setting it to active is required prior to the system logging any data.
The seasons are displayed in lists, with the Active season displayed in bold face type. All new data is logged to the active
season; therefore a season must be set as Active before you can log any new data to it.
If a user would like to remove logged data from the display, they can delete a season from the display. Before deleting a
Season, make sure that all logged data has been properly archived within management software or AgFiniti Mobile.
• Press to add a Season.
• Edit an existing name of a Season by highlighting that name and pressing button.
• Set Active button.
Press to set the season selected in the Summary list box to the active season.
• Season Reminder button.
Press to set the date that the system will prompt the operator to create a new season.
• Press to remove a season.
Users tab
User tab allows user to add, modify, or delete users from the display.
Add a user
1. Enter first name and/or last name (must enter a first or last name, entering both recommended).
2. Enter applicator license (optional). Press
3. Select Operator or Manager (can select either, none, or both). For more information on selecting Operator/Manager
and setting up permissions, see "Permissions tab" on page 78. Press
4. Enter and verify password (optional).
• Locks the display's ability to load/change operating configurations, access setup and USB, if Manager has a
password set.
• Leaves display unsecured unless each manager sets a password.
• Warning message appears if passwords do not match.
• No restriction for password format (can be any combination of letters, numbers, and special characters).
• Case sensitive.
5. 5. Press to accept.
Season
Users
Users
to continue.
4 - System setup
to continue.
77