Table of Contents
Advertisement
14. Check the data in the overview.
Press
to confirm selection.
ATTENTION! If Offsets need to be corrected,
μ
then press the
button to change the
antenna settings for the Selected Vehicle in
the drop down menu, before confirming
selection.
15. Create Implement by pressing the
button.
16. Implement Information:
A. Press the "Make"
implement name.
B. Press the "Model"
the implement model.
C. Press
to confirm.
to type in the
to type in
4 - System setup
Operating Configuration Wizard: Vehicle
Select Vehicle
JD 4630
Offsets
Antenna Location from Rear Axle
Antenna Location from Centerline
Antenna Height from Ground
Rear Drawbar
Rear Lift Arms
Front Lift Arms
Operating Configuration Wizard: Implement
Select Implement
Implement Wizard: Make and Model
Enter Implement Information
Make
Model
53
Advertisement
Table of Contents
