Hardi HC 9600 Operator's Manual page 60

4 - System setup
29. Press "Automatic Swath Control" to edit the
configuration.
30. Automatic Swath Control options:
• Outside Boundary Option
Select one of the two options to determine system behavior when a section exits a field boundary.
• Coverage Option
In the Coverage Option area, you must choose between three options:
• Minimize Skip
Turns off the implement section after the entire section is fully inside your coverage area.
This prevents the possibility of skips.
• Minimize Overlap
Turns off the implement section when that section first enters your coverage area.
This prevents the possibility of overlaps.
• User Defined
Allows you to choose what percentage of the implement section is within the coverage area before that section
turns off. For example, if you choose 50%, then the section will switch off when half of it is within your coverage
area.
• Press "Look Ahead Settings" to edit settings.
58
Configuration Setup
Vehicle
JD 4630
Implement: Hardi Commander
Vehicle
Full Swath:
Offsets
Sections:
Speed
Input
Auxiliary
Input
Norac
Automatic
UC5
Swath Control
Equipment Offsets
Settings
Automatic Swath Control
Planting Application
Coverage Option
Outside Boundary Option
Keep Unchanged Minimize Skip
Turn Section Off Minimize Overlap
User Defined
Controller: Hardi ISOBUS
Device:
Make:
Structure Label:
Look-Ahead
Settings