Hardi HC 9600 Operator's Manual page 119

Tramlines
Tramlines only available with Straight AB and Identical Curve Pattern Types
• Paths Between Tramlines
Use to enter the number of passes
between tramlines.
• Paths to Start Field
Use to enter the number of passes
at the beginning of the field before the first
tramline.
• Guide To
Use drop-down menu to choose between
Paths and Tramlines.
Adjust Tramline - move the placement of the tramline by one pass left
Use the toggle button to switch menu between Tramline and Nudge on the Mapping
Toolbox.
An audible warning is sounded to alert the operator a Tramline is reached when the vehicle is ½ a swath
width away.
Tramlines are also numbered under the Pass Number. This number will flash multiple times when the
Tramline is reached for a visual warning.
Tramlines
Guidance Options
Nudge
Shift Lightbar Tramlines
Save
Save
Group
Paths Between Tramlines:
Pause
Paths to Start Field:
Remark A
Guide To:
or right
4 - System setup
Paths
.
Straight
Adjust Tramline
117