Hardi HC 9600 Operator's Manual page 22

3 - Description
Video Button
Pressing this button takes you to the video screen. Pressing this button repeatedly cycles through the video inputs.
NOTE! For more information on the Video screen, see "Video" on page 27.
÷
4-wheel Steer Button (Self-Propelled only)
Activates logging of 4-wheel steering for AutoSectionControl.
AutoSwath Button
Pressing this button turns the AutoSwath (AutoSectionControl) feature on and off.
AutoSwath - ON
AutoSwath - OFF
AutoTerrain/AutoHeight button
The AutoTerrain/AutoHeight Engage button enables boom height control.
AutoTerrain/AutoHeight Engage - Enabled (Automatic Mode)
• When enabled the display beeps three times.
AutoTerrain/AutoHeight Engage - Disabled (Manual Mode)
• When you disable Automatic Mode on any part of the boom and the display switches to Manual Mode, this
button turns gray and the display beeps twice.
• If less than the full boom remains in Manual Mode, the display will continue beeping twice every three seconds.
AutoSteer Button
The Engage icon status of the AutoSteer system. The appearance of this icon displays the following:
AutoSteer is ON and ready to use.
AutoSteer is OFF but ready to engage.
AutoSteer is OFF and unable to engage.
NOTE! For more information, see "Steering" on page 115.
÷
Master Switch Status
This bar shows that the Master Switch is active.
Master Switch - ON (GREEN)
20
Master Switch - OFF (RED)