Adjustable Angle Back Support; Central Base Locking System; Locking Casters Use - OAKWORKS PG Series User Manual

DIRECTIONS FOR USE

ADJUSTABLE ANGLE BACK SUPPORT

CAUTION
TO RAISE BACK SUPPORT
Lift panel to desired angle. Panel will
automatically lock into nearest set point.
Panel can be raised to a full 90º position.

CENTRAL BASE LOCKING SYSTEM

LOCKING THE SYSTEM
Press down on locking arm with your foot to
lock table to the floor.

LOCKING CASTERS USE

All four casters should be locked at all times during use with a patient.
LOCKING THE CASTERS
1. Place your shoe on the end of the casters locking tab.
2. Press firmly downward until you here a clicking noise
and the caster is locked.
Do not sit on the Adjustable Angle Back Support. (Max Capacity 150 lbs. (68 kg.))
TO LOWER BACK SUPPORT
Press support bar against plastic plate and hold
until back support is lowered to desired position.
UN-LOCKING THE SYSTEM
Lift up on locking arm with your foot to unlock
table from the floor.
UN-LOCKING THE CASTERS
1. Place your shoe on top of the casters locking tab.
2. Press firmly inward and downward until you here a
clicking noise and the caster is unlocked.
21