Related Manuals for OAKWORKS PX150
Summary of Contents for OAKWORKS PX150
- Page 1 USER MANUAL PX150 & PX200 EMERGENCY FIELD BEDS made in the USA with US & imported parts www.oakworksmed.com · 717.235.6807...
- Page 2 OAKWORKS , Inc. tial damages in connection with or ® arising out of the furnishing, per- formance, or use of this document OAKWORKS is a registered and the program material which it ® trademark of OAKWORKS , Inc. describes. ®...
-
Page 3: Table Of Contents
Installation Grounding ............................. 6 Side/End Rail ............................6 Directions for Use PX150 & PX200 Control Operations ....................7 Adjusting the Back Rest ........................8 Side/End Rail Use ..........................8 Moving the bed ............................ 9 Dual Locking Casters Use ......................... 9 Cleaning &... -
Page 4: Product Use Description
PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS PRODUCT USE DESCRIPTION The PX150 & PX200’s are emergency field beds, intended for medical purposes. The bed allows for articulation of the head section to provide different positions for the patient. It is indicated to be used under medical supervision in a hospital or other medical facility. - Page 5 3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use. 4. Keep the cord away from heated surfaces.
-
Page 6: Selection Of A Mattress
Mattress (36”W x 80”L x 6”H) Part No. 82218 only. Other Mattresses have not been tested for use with the PX150 & PX200 Bed. SELECTION OF SIDE RAILS The PX150 & PX200 Beds are designed to have the PX150 & PX200 Bed Side Rails only. Part No. 82224 No testing has been done on other side rail systems. WARNING... -
Page 7: Product Description & Photo
PRODUCT DESCRIPTION PX150 Bed Optional Dual Locking Casters STANDARD SPECIFICATIONS Motion 1 Powered 23”-41” (59-104 cm.) Length 80” (203 cm) Motion 2 Manual 0º - 90º Backrest Mattress 6” Thick (15 cm), Removable, Water Resistant Foot Control Height Motion Bed Voltage Options... -
Page 8: Px200
PRODUCT DESCRIPTION PX200 Bed Optional Dual Locking Casters STANDARD SPECIFICATIONS Motion 1 Powered 24”-42” (61-107 cm.) Height Range Length 80” (203 cm) Motion 2 Powered 0º - 75º Backrest Width 36” (91 cm) Bed Weight 200 lbs. (91 kg.) 4 Button Hand Control Height & Backrest 6”... -
Page 9: Installation
INSTALLATION The Beds come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated for the bed. (see Grounding below) Arrange the power cord and control cords so that they will not create a tripping hazard and where the controls are located to your liking and are conveniently accessible. -
Page 10: Directions For Use
Be sure the casters are locked or the self-locking molded rubber feet are flat side down if there are no casters to ensure safety and stability. The O PX150 bed offers height positioning with electronic ease. Operate the Foot Control as ® AKWORKS shown below to raise or lower the height of the bed. -
Page 11: Adjusting The Back Rest
DIRECTIONS FOR USE ADJUSTING THE BACK REST SECTION - PX150 BEDS ONLY CAUTION Do not sit on the Backrest section. TO RAISE THE BACK REST TO LOWER THE BACK REST: Raise the back rest by pressing the lever Press the lever under the head section and under the head section and lifting up to the push the back rest down. -
Page 12: Moving The Bed
DIRECTIONS FOR USE MOVING THE BED Before moving any of the Beds, disconnect the power cord from the power outlet. The bed CAUTION weighs as much as 200 lbs. (91 kg.) Use extreme caution when lifting the bed to move it. Two people are required to move the bed safely. -
Page 13: Cleaning & Disinfection
® Green Windex ® The following disinfectants were tested by OAKWORKS ® and found to be acceptably compatible with all materials used in construction of our beds: Clorox Everest / Formula 409® Multi-Surface Cleaner (EPA Reg. No. 5813-73) Parker Labs: Protex™1 (EPA Reg. No. 6836-152) Clorox 10% household (Bleach) Solution (EPA Reg. -
Page 14: Cleaning Process
Follow the cleaners/disinfectant manufacturers’ directions for use. Please note that cleaning and disinfecting the PX150 & PX200 Beds is a two part process. First it must be cleaned of any visible soil, then it can be disinfected. The bed should be cleaned as soon as possible after use. -
Page 15: Model Number & Serial Number
MODEL NUMBER & SERIAL NUMBER PX BED The model number and serial number are located on the underside of the seat section. Model Number Serial Number Model Numbers and Serial Numbers always start with a letter. 16796025 PXEXFT311873ACTTVN Ser#: PXR563146 PX FT 30 x 22-38 x 72 3M/TT/2S TTSKYBLUE 01/04/2020 Order#:654321 Notes: Sample Product Label... -
Page 16: Specifications
SPECIFICATIONS ENVIRONMENTAL CONDITIONS Conditions Temperature Humidity Atmospheric Pressure Normal Use 50° (10°C) to 104° (40°C) 20% to 60% RH 98 to 105 kPa Storage & Transport -20° (-29°C) to 135° (57°C) 20% to 95% RH 98 to 105 kPa ELECTRICAL SPECIFICATIONS Designed for: North America Europe... -
Page 17: Guidance And Manufacturer's Declaration - Electromagnetic Emissions
SPECIFICATIONS Guidance and manufacturer’s declaration - electromagnetic emissions The bed is intended for use in the electromagnetic environment specified below. The customer or the user of the bed should assure that it is used in such an environment. Emissions Test Compliance Electromagnetic environment - guidance The bed uses RF energy only for its internal... -
Page 18: Guidance And Manufacturer's Declaration - Electromagnetic Immunity
SPECIFICATIONS Guidance and manufacturer’s declaration - electromagnetic immunity The bed is intended for use in the electromagnetic environment specified below. The customer or the user of the bed should assure that it is used in such an environment. Electromagnetic Immunity Test IEC 60601 test level Compliance level environment - guidance... - Page 19 SPECIFICATIONS Guidance and manufacturer’s declaration - electromagnetic immunity The bed is intended for use in the electromagnetic environment specified below. The customer or the user of the bed should assure that it is used in such an environment. Electromagnetic Immunity Test IEC 60601 test level Compliance level environment - guidance...
-
Page 20: Contact Information
USER MANUAL PX150 & PX200 EMERGENCY FIELD BEDS CONTACT INFORMATION: Inc. ® AKWORKS 923 East Wellspring Road New Freedom, PA 17349 Phone: 717-235-6807 FAX: 717-235-6798 www.oakworksmed.com 3034177 CONFORMS TO: ANSI/AAMI STD ES60601-1 IEC STD 60601-1 3RD EDITION IEC STD 60601-1-2 3RD EDITION IEC STD 60601-1-6 3RD EDITION CERTIFIED TO CAN/CSA STD C22.2 NO.