Page 1
USER MANUAL OAKWORKS ® DTPM 300 Imaging Table made in the USA with US & imported parts www.oakworksmed.com · 717.235.6807...
Page 2
® damages in connection with or arising out of the furnishing, performance, or OAKWORKS is a registered use of this document and the program ® trademark of OAKWORKS , Inc. material which it describes. ®...
TABLE OF CONTENTS Product Use Description ....................Contraindications ......................Important Safety Instructions Symbol Identification ....................Safety Instructions ....................Product Description & Photo DTPM300 - Polycarbonate Top ..................Installation Grounding ........................Directions for Use Foot Control Operations ..................6 Hand Control Operations ..................7 Manual Longitudinal Travel Operation ..............
P R O D U C T U S E D E S C R I P T I O N The Oakworks® Fluoroscopy table with Trendelenburg feature is a radiographic table intended for use with mobile or compact stationary C-arm Fluoroscopy Systems where the x-ray generator is located below the table top.
Page 5
IMPORTANT SAFETY INSTRUCTIONS I M P O R T A N T S A F E T Y I N S T R U C T I O N S CAUTION READ AND SAVE THESE INSTRUCTIONS Improper use of this device can cause injury. Be sure to read all operating instructions prior to use. Duty Cycle: Max.
Page 6
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use. 4. Keep the cord away from heated surfaces.
INSTALLATION The Imaging tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated for the table. (see Grounding below) Arrange the power cord and control cords so that they will not create a tripping hazard and where the controls are located to your liking and are conveniently accessible.
DIRECTIONS FOR USE The Oakworks Fluoroscopy Table with Trendelenburg positioning offers a variety of positioning ® capabilities for diagnostic x-ray imaging and imaging during therapeutic procedures. DANGER Should the use of this device create a circumstance under which the patient could be overexposed to ionizing radiation, discontinue use immediately and determine an alternative radiology table or alter- native x-ray generating source to use.
DIRECTIONS FOR USE H A N D C O N T R O L O P E R A T I O N S CAUTION When lowering the chair or using the Trendelenburg functions, make sure there is nothing that can impede motion (like stools, cabinets, accessory parts, cleaners, etc.) When operating the table’s controls, be sure to observe all cautions and warnings.
DIRECTIONS FOR USE M A N U A L L O N G I T U D I N A L T R A V E L O P E R A T I O N CAUTION When operating the table’s locking knob be sure to avoid pinching. Keep your fingers and other materials clear from the pinch point.
DIRECTIONS FOR USE T O P P A D R E M O V A L Remove the Top Pad by pulling the flaps at the underside of the table on either end until the Hook and Loop Faster detaches. Replace the pad by first centering on the table and then pressing the flaps in place, anchoring the flaps to the Fastener Hook and Loop Faster as shown.
Do not place undue weight or downward pressure on the Fluoro Extender. It is a positioning device for the arms and should not be used as leverage to get on or off the table. Injury can occur. The Oakworks Fluoro Extender is radiolucent and offers extra width only where you need it for great- ®...
DIRECTIONS FOR USE S P I N E P O S I T I O N I N G S Y S T E M I I (A C C E S S O R Y) For directions on the use of the Spine Positioning System, see publication “Spine Positioning System” Part number MMMMNUP0003 CONTOURED TORSO SUPPORT PAD...
REFERENCE U S A B L E I M A G I N G A R E A CENTERED FOR A-P VIEW: [16.57 CM] [16.57 CM] 12.01" 37.93" 12.01" [30.52 CM] [96.33 CM] [30.51 CM] 19.88" [50.48 CM] CENTERED OBLIQUE 30º VIEW FROM VERTICAL 6.52"...
Page 16
REFERENCE OFFSET FOR A-P VIEW: OFFSET CAUDAL 30º VIEW FROM VERTICAL...
To reduce the risk of electric shock: DANGER - Always unplug this furnishing from the electrical outlet before cleaning. The following cleaners were tested by OAKWORKS ® and found to be acceptably compatible with all materials used in construction of our tables: Formula 409 ®...
- Always unplug this furnishing form the electrical outlet before cleaning. ® Follow the cleaners/disinfectant manufacturers’ directions for use. Please note that cleaning and disinfecting an OAKWORKS table is a two part process. First it must be cleaned of any visible soil, then it can be disinfected. The table should be cleaned as soon as possible after use.
MODEL NUMBER & SERIAL NUMBER M O D E L & S E R I A L N U M B E R S Serial Number Model Number 16796025 FLDTRT242478MGTTZZ Ser#: FLR561910 DTPM RT 24 x 24-40 x 78 MG/TT TTCoal 01/04/2013 Order#:654321 Notes: Sample Product Label Model Numbers and Serial Numbers always start with a letter.
SPECIFICATIONS PRODUCT SPECIFICATIONS Materials of Construction This product contains no latex. Top Frame Extruded aluminum with powdercoated or anodized surfaces. Table Top .5” (1.3 cm.) Polycarbonate Patient Comfort 1” (2.5 cm.) upholstered foam pad Table Length 78” (198 cm.) Table Width 24”...
SPECIFICATIONS Guidance and Manufacturer’s Declaration - Electromagnetic Emissions The table is intended for use in the electromagnetic environment specified below. The customer or the user of the table should assure that it is used in such an environment. Emissions Test Compliance Electromagnetic environment - guidance The table uses RF energy only for its internal...
SPECIFICATIONS Guidance and manufacturer’s declaration - electromagnetic immunity The table is intended for use in the electromagnetic environment specified below. The customer or the user of the table should assure that it is used in such an environment. Electromagnetic Immunity Test IEC 60601 test level Compliance level environment - guidance...
Page 23
SPECIFICATIONS Guidance and manufacturer’s declaration - electromagnetic immunity The table is intended for use in the electromagnetic environment specified below. The customer or the user of the table should assure that it is used in such an environment. Electromagnetic Immunity Test IEC 60601 test level Compliance level environment - guidance...
USER MANUAL OAKWORKS ® DTPM300 Imaging Table C O N T A C T I N F O R M A T I O N: Oakworks Inc. ® 923 East Wellspring Road New Freedom, PA 17349 Phone: 717-235-6807 FAX: 717-235-6798 www.oakworksmed.com...