Tandem Connection Kit, 25E595 - Graco E-Flo SP D200S Installation And Parts Manual

Tandem Connection Kit, 25E595

Ref. Part Description
501 121226 CABLE, can, 0.4 m
502 124003 CABLE, can, 5.0 m
503 121003 CABLE, can, 3.0 m
504 121807 CONNECTOR, splitter
505 114958 STRAP, tie
506 117329 STRAP, tie
To install the Tandem Connection Kit:
1. On the primary tandem unit (Ram 1), connect the
cable (501) from port C1 to the splitter (504).
Ram 1
Ram 1
501
504
3A6331C
2. Connect the other cable (503) from the splitter to the
Qty.
1
1
1
1
3
6
3. Connect the cable (502) from the splitter to port C2
Ram 2
Port C1
4. See the E-Flo SP Software Instructions manual for
ADM. Run the cable along the back of the ram using
wire ties (505) to secure to the tubing.
Ram 1
503
on the secondary tandem unit (Ram 2) junction box.
Ram 1
504
502
Ram 2
system setup.
Kits and Accessories
504
503
505
502
57