Type Code And Selection Guide; Drive Configurator - Danfoss VLT DriveMotor FCM 106 Design Manual

Type Code and Selection Gui... ®
VLT DriveMotor FCP 106 and FCM 106 Design Guide

5 Type Code and Selection Guide

5.1 Drive Configurator

Configure a frequency converter according to the
application requirements, using the ordering number
system.
Frequency converter motors can be ordered as standard or
with internal options by using a type code string, for
5 5
example
FCM106P4K0T4C55H1FSXXAXXE4N4K0150B03000
Refer to the section chapter 5.2 Type Code String for a
detailed specification of each character in the string. In the
example above, a motor with efficiency class IE4 and load
profile is normal overload is included in the frequency
converter motor. Ordering numbers for frequency
converter motor standard variants are available later in this
chapter.
To configure the correct frequency converter or frequency
converter motor for an application, and generate the type
code string, use the Internet based Drive Configurator. The
Drive Configurator automatically generates an 8-digit sales
number to be delivered to the local sales office.
Furthermore, it can establish a project list with several
products and send it to a Danfoss sales representative.
To access the Drive Configurator, go to: www.danfoss.com/
drives.
MG03M102 - 08/2015 43