Ordering Numbers - Danfoss VLT DriveMotor FCM 106 Design Manual

Type Code and Selection Gui...

5.3 Ordering Numbers

5.3.1 Options and Accessories
5 5
Local Control Panel (LCP), IP 55
Mounting kit incl. 3 m cable, IP 55, for LCP
Local Operating Pad (LOP), IP 65
Motor adapter plate kit:
motor adapter plate, motor plug, PE connector, gasket
for use between FCP 106 and adapter plate, 4 screws
Wall adapter plate kit
Potentiometer option
Table 5.3 Options and Accessories, Ordering Numbers
1) Power ratings relate to NO, see chapter 6.2 Electrical Data.
a) Data available upon future release.
5.3.2 Spare Parts
For ordering numbers and ordering in general, refer to
•
VLT Shop at http://vltshop.danfoss.com.
•
Drive Configurator at www.danfoss.com/drives.
Item
Fan assembly,
MH1
Fan assembly,
MH2
Fan assembly,
MH3
Accessory bag,
MH1
Accessory bag,
MH2
Accessory bag,
MH3
Table 5.4 Ordering Numbers, Spare parts
5.3.3 Parts Required for Installation
Additional items required for motor connection:
Crimp terminals
46
®
VLT
Description
Description Ordering No.
Fan assembly,
134B0345
enclosure type MH1
Fan assembly,
134B0395
enclosure type MH2
Fan assembly,
134B0445
enclosure type MH3
Accessory bag,
134b0346
enclosure type MH1
Accessory bag,
134b0346
enclosure type MH2
Accessory bag,
134b0446
enclosure type MH3
DriveMotor FCP 106 and FCM 106 Design Guide
Mains voltage T4 (380-480 V AC)
MH1
[kW/Hp]
0.55-1.5/
0.75-2
134B0340
a)
•
•
AMP standard power timer contacts, TE order
numbers:
•
•
•
For full installation information including motor
connection, refer to the VLT
106 Operating Instructions.
MG03M102 - 08/2015
Enclosure type 1)
MH2 MH3
[kW/Hp] [kW/Hp]
2.2-4/ 5.5-7.5/
3-5.5 7.5-10
132B0200
134B0557
175N0128
134B0390 134B0440
a)
177N0011
3 pcs for motor terminals, UVW
2 pcs for thermistor (optional)
2
927827 (0.5-1 mm ) [AWG 20-17]
927833 (1.5-2.5 mm 2 ) [AWG 15.5-13.5]
2
927824 (2.5-4 mm ) [AWG 13-11]
®
DriveMotor FCP 106 and FCM
a)