Online Programming - CEStronics Omega Active Programming Instructions Manual

Online programming

You can also control and manage your locking systems via a
radio frequency link. This allows a convenient management
and programming of the entire locking system.
The following components are required for wireless
programming (see also next page):
 State-of-the-art PC (1, 2) with Windows 7™, Windows 8™,
Windows Server 2008™ or Windows Server 2013™ (XP™
and Windows Server™ 2003 are no longer supported).
1 GHz processor, at least 1 GB RAM, at least 1 GB free hard
disk memory
 Network card (TCP/IP)
 CD-ROM drive for software installation
 One free USB port to use the RF-Stick (optional)
 An existing Internet connection to use the OMEGA
Quicksupport
 Monitor with a resolution of 1024 768 pixel
 OMEGA ACTIVE Access Points (No. 3, maximum ten locking
devices per Access Point).
 OMEGA Software
 At least one locking device (No. 4).
 A valid license for the ACTIVE client.
 The RF-Stick (5) can be used either instead of Access Points
(3) or in addition to Access Points.
38
OMEGA ACTIVE Programming Instructions
Online programming