CEStronics Omega Active Programming Instructions Manual page 13

Description
Scope
The system is suitable for scaling over a wide range:
 as a manual system with simple manual programming via
Master media at the locking device;
 as a medium-scale locking system with the entire
programming being performed at your PC with the OMEGA
software and transmission of the data to the individual
locking devices via the RF-Stick by radio transmission;
 as a large-scale locking system with the entire programming
being performed at your PC with the OMEGA software and
immediate transmission of the data via the linked Access
Points. Virtually no time is lost by going to the individual
devices for manual programming.
 You can additionally use the CP100 programmer to program
locking devices without a wireless link. In this case, the
CP100 serves as your data communicator between your PC
and the locking device.
The OMEGA ACTIVE system is based on active transponders.
Unlike passive transponders such as are used in the 125 kHz
series, this allows reading distances of about 70 cm in all three
dimensions.
This means that it is no longer necessary for you to take the
locking medium into your hand.
All OMEGA ACTIVE transponder media can be used as
authorized locking media for your locking devices.
The OMEGA ACTIVE locking devices additionally comprise a
reader for 125 kHz locking media, such as Hitag and EM 4102,
so that also your locking media of the OMEGA 125 kHz series
can be read.
Your locking devices can only be operated with authorized
locking media.
OMEGA ACTIVE Programming Instructions
13