CEStronics Omega Active Programming Instructions Manual page 32

TIME-MASTER
With the TIME-MASTER, you set the opening time of the
locking cylinder or access terminal. During the opening time,
your locking device allows free access.
 For locking cylinders or shields, this is the period during
which the knob is coupled with the follower time.
 For wall terminals, this is the period during which the relay
is pulled up.
To set the opening time of your locking devices with the TIME-
MASTER, proceed as follows:
Rotate the outside knob of the locking cylinder by at least

one notch or touch the proximity sensor.
Hold the TIME-MASTER in front of the locking cylinder, the

IES shield or the wall terminal.
When the locking device detects the TIME-MASTER, it starts
beeping at one-second intervals. The number of beeps
determines the opening time.
Example:
5 x Beeper = 5 seconds opening time
32
OMEGA ACTIVE Programming Instructions
Optional Master media