Activating Online Mode - CEStronics CES OMEGA FLEX Manual

2 Signalling while using the master media

2.15 Activating online mode

Required master media:
RF-Ini-Master
l
For the activation of online mode it is not necessary to authorise the RF-Ini-Master in
advance.
Procedure:
1. Hold the RF-Ini-Master for ca 1 second in the reading field of the locking device.
Following signals appear:
A: 1x short green and 1x short beep
= successfully connected to the Access-Point
B: 1x long red and 1x long beep
= no connection to the Access-Point possible
C: 1x long green and 1x long beep
= Connection to the Access-Point existed already
2. Remove the RF-Ini-Master from the reading field.
The online mode is now deactivated.
Even if no connection to the Access-Point was possible, the locking device is now in online
mode. Once an Access-Point is found, it will connect itself automatically.
Signalling of OMEGA FLEX Locking devices Page 27 of 39