CEStronics Omega Active Programming Instructions Manual page 42

Table of Contents

Advertisement

Active locking media (OMEGA ACTIVE series)
Move with your authorized locking system (1) into the
reading range of the locking cylinder. This range is about
70 cm. You do not have to hold your locking medium in
your hand.
The reader module in the outside knob identifies the locking
medium.
Rotate the outside knob by some notches.
The locking cylinder sends a short signal to signal the enable
status. During the opening time you can open the door.
During this opening time, the locking cylinder does not respond
to any other locking media.
To open the door lock, rotate the outside knob in the
corresponding direction (2).
Release the knob immediately after the door has been
opened. You do not have to turn the knob back into its
original position.
If you are using a locking medium that is not authorized to
enable this locking cylinder, the light ring of the locking
cylinder flashes red four times and you hear four successive
beeps. In this case, the outside knob is not coupled with the
follower. The outside knob rotates freely but the door lock
cannot be operated.
42
OMEGA ACTIVE Programming Instructions
Opening locking devices

Advertisement

Table of Contents
loading

Table of Contents