CEStronics Omega Active Programming Instructions Manual page 24

Authorizing a PROGRAM-MASTER
With this SYSTEM-MASTER, you can now authorize up to ten
PROGRAM-MASTERS. Proceed as follows:
Hold the SYSTEM-MASTER in front of the reader.

Rotate the outside knob of the locking cylinder by at least

one notch or touch the proximity sensor.
The LED signals green as long as the SYSTEM-MASTER is
within reading range. When you leave this range, this is
signalled with a short beep.
Hold the PROGRAM-MASTER in front of the reader for a

short moment.
The LED signals green as long as the PROGRAM-MASTER is
within reading range. When you leave the range, this is
signalled with a short beep.
If you wish to authorize additional PROGRAM-MASTERS,

hold them successively in front of the reader, proceeding as
described above.
To complete the process, hold the SYSTEM-MASTER in front

of the reader for a short moment.
The LED signals green as long as the SYSTEM-MASTER is again
within the range of the reader. When you leave the range, this
is signalled with a long beep. This completes the authorization
of the PROGRAM-MASTER(S).
24
OMEGA ACTIVE Programming Instructions
Basic programming routine