Authorizing optional Master media
Rotate the outside knob of the locking cylinder by at least
one notch or touch the proximity sensor.
Hold the SYSTEM-MASTER in front of the reader.
The LED signals green as long as the SYSTEM-MASTER is
within reading range. When you leave this range, this is
signalled with a short beep.
Hold the Master media in front of the reader for a short
moment.
The LED signals green as long as the PROGRAM-MASTER is
within reading range. When you leave the range, this is
signalled with a short beep.
If you wish to authorize additional Master media, hold them
successively in front of the reader, proceeding as described
above.
To complete the process, hold the System-Master in front of
the reader for a short moment.
The LED signals green as long as the System-Master is again
within the range of the reader. When you leave the range, this
is signalled with a long beep. This completes the authorization
of the optional Master media(s).
26
OMEGA ACTIVE Programming Instructions
Basic programming routine