Table of Contents
Advertisement
Opening locking devices
Opening locking devices
Opening locking cylinder
Passive locking media (125 kHz series)
Rotate the outside knob by some notches.
Within two seconds, hold your authorized locking medium
(1) in front of the outside knob (2) of the locking cylinder.
The reader module in the outside knob identifies the locking
medium. Green LEDs in the light ring of the locking cylinder
signal the enabled status.
The outside knob is coupled with the follower.
Rotate the outside knob to open the door.
Release the knob immediately after the door has been
opened. You do not have to turn the knob back into its
original position.
OMEGA ACTIVE Programming Instructions
41
Advertisement
Table of Contents
