CEStronics Omega Active Programming Instructions Manual page 48

The RF-Stick is an advancement of the CP 100 programmer
(which can still be used).
The RF-Stick is used to trigger the programming process. For
this purpose, your locking device must know the RF-Stick, i.e.
the RF-Stick must have been authorized for the programming
at your locking device.
To authorize the programming, you always need the RF-
STICK-MASTER.
The maximum number of RF-STICK-MASTERs is limited to ten
per system.
The RF-Stick is inserted in your PC. To use it, you must install
it with the supplied drivers of the OMEGA software.
As an alternative, you can also install the RF-Stick on a
netbook which will make you independent of your office PC and
will allow you to program your locking devices locally, provided
the OMEGA software has been installed without errors.
48
An RF-STICK-MASTER authorizes RF-
Sticks.
The RF-Stick is always tied to your system
licence.
One locking device can manage up to ten
RF-STICK-MASTERs.
OMEGA ACTIVE Programming Instructions
Opening locking devices