Table of Contents
Advertisement
Before you can work with the RF-Stick and the OMEGA
Software Suite, your data files (= system data; database)
must be loaded. The data files are delivered to you together
with the licence file on the supplied USB stick.
If you have purchased an RF-Stick Set package or an RF-Stick
Programming Package, these data files must be imported.
If you have purchased a RF-Stick package, you continue using
your already existing data and you do not have to import
anything.
The procedure described below only applies to
new first-time software installations.
Please refer also to the chapter on importing
locking systems in the OMEGA ACTIVE software
operating instructions. These are available free of
charge at www.ces.eu.
To import the data files for the first time, proceed as follows:
Start OMEGA ACTIVE Client until the login window appears.
Do not log in.
Insert the USB stick into a free USB port.
The data files are loaded automatically.
Wait until the loading process has been completed, which is
signalled with "Finished".
Now log in at OMEGA Software-Suite.
Continue with your desired editing.
If you insert the RF-Stick again, the loading
process will not be repeated. The loading process
is only executed once.
50
OMEGA ACTIVE Programming Instructions
Opening locking devices
Advertisement
Table of Contents
